Acl Packet Format Configuration; Acl Metering Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

ACL Packet Format configuration

The following table describes the Packet Format Configuration commands.
Table 159 Packet Format Configuration commands
Command
access-control list <1-896>
packet-format ethernet
{ethertype2|snap|llc}
[no] access-control list
<1-896> packet-format tagged
default access-control list
<1-896> packet-format
show access-control list
<1-896> packet-format

ACL Metering configuration

The following table describes the ACL Metering Configuration commands.
ACL Metering Configuration commands
Table 160
Command
access-control list <1-896>
meter committed-rate
<64-1000000>
access-control list <1-896>
meter maximum-burst-size
<32-4096>
[no] access-control list
<1-896> meter enable
access-control list <1-896>
meter action {drop|pass}
default access-control list
<1-896> meter
show access-control list
<1-896> meter
Description
Defines the Ethernet format for the ACL.
Command mode: Global configuration
Defines the tagging format for the ACL.
Command mode: Global configuration
Resets Packet Format parameters for the ACL to their default values.
Command mode: Global configuration
Displays the current Packet Format parameters for the ACL.
Command mode: All except User EXEC
Description
Configures the committed rate, in Kilobits per second. The committed rate
must be a multiple of 64.
Command mode: Global configuration
Configures the maximum burst size, in Kilobits. Enter one of the following
values for mbsize: 32, 64, 128, 256, 512, 1024, 2048, 4096
Command mode: Global configuration
Enables or disables Metering on the ACL.
Command mode: Global configuration
Configures the ACL Meter to either drop or pass out-of-profile traffic.
Command mode: Global configuration
Reset ACL Metering parameters to their default values.
Command mode: Global configuration
Displays the current ACL metering parameters.
Command mode: All except User EXEC
Configuration Commands
166