Uplink Failure Detection Information; Information Dump - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

Uplink Failure Detection information

The following command displays Uplink Failure Detection (UFD) information:
show ufd
Command mode: All except User EXEC
Uplink Failure Detection: Enabled
LtM status: Down
Member
---------
port 24
* = STP turned off for this port.
LtD status: Auto Disabled
Member
---------
port
port
port
port
Uplink Failure Detection (UFD) information includes:
UFD status, either enabled or disabled
LtM status and member ports
Spanning Tree status for LtM ports
LtD status and member ports

Information dump

The following command dumps switch information:
show information-dump
Command mode: All
Use the dump command to dump all switch information available from switch memory (10K or more,
depending on your configuration). This data is useful for tuning and debugging switch performance.
If you want to capture dump data to a file, set the communication software on your workstation to capture
session data prior to issuing the dump commands.
STG STG State
--- ------------
1 DISABLED
10 DISABLED *
15 DISABLED *
Link Status
-----------
1 disabled
2 disabled
3 disabled
4 disabled
Link Status
-----------
down
Information Commands
65