Snmpv3 Group Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

Table 86 View-based Access Control Configuration commands
Command
snmp-server access <1-32> level
{noAuthNoPriv|authNo-
Priv|authPriv}
snmp-server access <1-32> read-
view <1-32 characters>
snmp-server access <1-32> write-
view <1-32 characters>
snmp-server access <1-32> notify-
view <1-32 characters>
no snmp-server access <1-32>
show snmp-server access <1-32>

SNMPv3 Group configuration

The following table describes the SNMPv3 Group Configuration commands.
SNMPv3 Group Configuration commands
Table 87
Command
snmp-server group <1-16>
security {usm|snmpv1|snmpv2}
snmp-server group <1-16>
user-name <1-32 characters>
snmp-server group <1-16>
group-name <1-32 characters>
no snmp-server group <1-16>
Description
Defines the minimum level of security required to gain access rights.
The level noAuthNoPriv means that the SNMP message will be
sent without authentication and without using a privacy protocol.
The level authNoPriv means that the SNMP message will be sent
with authentication but without using a privacy protocol. The
authPriv means that the SNMP message will be sent both with
authentication and using a privacy protocol.
Command mode: Global configuration
Defines a 32 character long read view name that allows you read
access to a particular MIB view. If the value is empty or if there is no
active MIB view having this value then no access is granted.
Command mode: Global configuration
Defines a 32 character long write view name that allows you write
access to the MIB view. If the value is empty or if there is no active
MIB view having this value then no access is granted.
Command mode: Global configuration
Defines a 32 character long notify view name that allows you notify
access to the MIB view.
Command mode: Global configuration
Deletes the View-based Access Control entry.
Command mode: Global configuration
Displays the View-based Access Control configuration.
Command mode: All
Description
Defines the security model.
Command mode: Global configuration
Sets the user name. The user name can have a maximum of
32 characters.
Command mode: Global configuration
The name for the access group. The group name can have a maximum of
32 characters.
Command mode: Global configuration
Deletes the vacmSecurityToGroup entry.
Command mode: Global configuration
Configuration Commands
111