Table 76
System Configuration commands
Command
[no] enable <string>
show system
System host log configuration
The following table describes the Syslog Configuration commands.
Table 77
Syslog Configuration commands
Command
[no] logging host {<1-2>} address {<IP
address>}
logging host {<1-2>} severity {<1-7>}
logging host {<1-2>} facility {<1-7>}
[no] logging console
Usage
Allows administrators to assign the Privilege EXEC password. The
password will be required to enter Privilege EXEC mode. The default value
is disabled.
Command mode: Global configuration
Displays the current system parameters.
Command mode: All
Description
Sets the IP address of the first or second syslog host. For
example, 100.10.1.1.
Command mode: Global configuration
Sets the severity level of the first or second syslog host
displayed. The default is 7, which means log all the severity
levels.
Command mode: Global configuration
This option sets the facility level of the first or seconds syslog
host displayed. The default is 0.
Command mode: Global configuration
Enables or disables delivering syslog messages to the
console. When necessary, disabling console ensures the
switch is not affected by syslog messages. It is enabled by
default.
Command mode: Global configuration
Configuration Commands
100