Table 78
SSHD Configuration commands
Command
ssh scp-password
ssh generate-host-key
ssh generate-server-key
ssh port <TCP port number>
ssh scp-enable
no ssh scp-enable
ssh enable
no ssh enable
show ssh
RADIUS server configuration
NOTE:
See the HP 1:10Gb Ethernet BL-c Switch Application Guide for information on RADIUS.
The following table describes the RADIUS Server Configuration commands.
RADIUS Server Configuration commands
Table 79
Command
[no] radius-server primary-host
<IP address> key <1-32 characters>
Description
Defines the administrator password that is for Secure Copy (SCP) only.
The username for this SCP administrator is scpadmin.
Typically, SCP is used to copy files securely from one machine to another.
In the switch, SCP is used to download and upload the switch
configuration using secure channels.
Command mode: Global configuration
Generates the RSA host keys manually. The switch creates this key
automatically while configuring the switch with Secure Shell (SSH). But
you can generate the key manually by using this command if you need to
overwrite the key for security reasons. The command will take effect
immediately.
Command mode: Global configuration
Generates the RSA server key. The switch creates this key automatically
while configuring the switch with Secure Shell (SSH). You can generate
the key manually by using this command if you need to overwrite the key
for security reasons. The command will take effect immediately.
Command mode: Global configuration
Sets the SSH server port number.
Command mode: Global configuration
Enables the SCP apply and save.
Command mode: Global configuration
Disables the SCP apply and save. This is the default for SCP.
Command mode: Global configuration
Enables the SSH server.
Command mode: Global configuration
Disables the SSH server. This is the default for the SSH server.
Command mode: Global configuration
Displays the current SSH server configuration.
Command mode: All
Description
Sets the primary RADIUS server address and shared secret
between the switch and the RADIUS server(s).
Command mode: Global configuration
Configuration Commands
102