Table 135
OSPF Virtual Link Configuration commands
Command
show ip ospf area-virtual-
link <1-3>
OSPF Host Entry configuration
The following table describes the OSPF Host Entry Configuration commands.
Table 136
OSPF Host Entry Configuration commands
Command
host <1-128> address <IP address>
host <1-128> area <0-2>
host <1-128> cost <1-65535>
host <1-128> enable
no host <1-128> enable
no host <1-128>
show ip ospf host {<1-128>}
OSPF Route Redistribution configuration
The following table describes the OSPF Route Redistribution Configuration commands.
Table 137
OSPF Route Redistribution Configuration commands
Command
redistribute {fixed|static|rip}
{<1-32>}
no redistribute {fixed|static|rip}
{<1-32>}
Description
Displays the current OSPF virtual link settings.
Command mode: All except User EXEC
Description
Configures the base IP address for the host entry.
Command mode: Router OSPF
Configures the area index of the host.
Command mode: Router OSPF
Configures the cost value of the host.
Command mode: Router OSPF
Enables OSPF host entry.
Command mode: Router OSPF
Disables OSPF host entry.
Command mode: Router OSPF
Deletes OSPF host entry.
Command mode: Router OSPF
Displays the current OSPF host entries.
Command mode: All except User EXEC
Description
Adds selected routing maps to the rmap list.
This option adds a route map to the route redistribution list. The
routes of the redistribution protocol matched by the route maps
in the route redistribution list will be redistributed.
Command mode: Router OSPF
Removes the route map from the route redistribution list.
Removes routing maps from the rmap list.
Command mode: Router OSPF
Configuration Commands
149