Udp Statistics; Igmp Multicast Group Statistics - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Cli Reference Manual

Table 59 TCP statistics
Statistics
tcpRetransSegs
tcpInErrs
tcpCurBuff
tcpCurConn
tcpOutRsts

UDP statistics

The following command displays UDP statistics:
show ip udp counters
Command mode: All except User EXEC
UDP statistics:
udpInDatagrams:
udpInErrors:
The following table describes the User Datagram Protocol (UDP) statistics:
Table 60 UDP statistics
Statistics
udpInDatagrams
udpOutDatagrams
udpInErrors
udpNoPorts

IGMP Multicast Group statistics

The following command displays statistics about the use of the IGMP Multicast Groups:
show ip igmp counters
Command mode: All except User EXEC
Enter VLAN number:
------------------------------------------------------------
IGMP Snoop vlan 1 statistics:
------------------------------------------------------------
rxIgmpValidPkts:
rxIgmpGenQueries:
rxIgmpLeaves:
txIgmpReports:
txIgmpLeaves:
These commands enable you to display statistics regarding the use of the IGMP Multicast Groups.
Description
The total number of segments retransmitted, that is, the number of TCP segments
transmitted containing one or more previously transmitted octets.
The total number of segments received in error (for example, bad TCP checksums).
The total number of outstanding memory allocations from heap by TCP protocol stack.
The total number of outstanding TCP sessions that are currently opened.
The number of TCP segments sent containing the reset (RST) flag.
54 udpOutDatagrams:
0 udpNoPorts:
Description
The total number of UDP datagrams delivered to the switch.
The total number of UDP datagrams sent from this switch.
The number of received UDP datagrams that could not be delivered for reasons other
than the lack of an application at the destination port.
The total number of received UDP datagrams for which there was no application at the
destination port.
(1-4095) 1
0 rxIgmpInvalidPkts:
0 rxIgmpGrpSpecificQueries:
0 rxIgmpReports:
0 txIgmpGrpSpecificQueries:
0
43
1578077
0
0
0
0
Statistics commands 68