Secure Shell Server Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

Table 77 Syslog Configuration commands
Command
[no] logging log {<feature>}
show logging

Secure Shell Server configuration

Telnet traffic on the network is not secure. These commands enable Secure Shell (SSH) access from any
SSH client. The SSH program securely logs into another computer over a network and executes
commands in a secure environment. All data using SSH is encrypted.
Secure Shell can be configured on the switch using the console port only. The commands are not
available if you access the switch using Telnet or the Browser-based Interface (BBI).
NOTE: See the HP 1:10Gb Ethernet BL-c Switch Application Guide for information on SSH.
The following table describes the SSHD Configuration commands.
Table 78 SSHD Configuration commands
Command
ssh interval <0-24>
Description
Displays a list of features for which syslog messages can be
generated. You can choose to enable/disable specific
features or enable/disable syslog on all available features.
Features include:
console
system
mgmt
cli
stg
vlan
ssh
ntp
ip
web
rmon
ufd
Command mode: Global configuration
Displays the current syslog settings.
Command mode: All
Description
Defines interval for auto-generating the RSA server key. The switch will
auto-generate the RSA server key at the interval defined in this command.
The range is 0-24 hours.
The value of zero (0) means the RSA server key auto-generation is
disabled. If the switch has been busy performing any other key generation
and the assigned time of interval expires, the RSA server will skip
generating the key.
Command mode: Global configuration
Configuration Commands
101