Routing Information Protocol
The following table describes the Routing Information Protocol (RIP) information commands.
Table 35
RIP information commands
Command
show ip rip routes
show ip rip interface [<1-255>]
show interface ip rip
RIP Routes information
The following command displays RIP route information:
show ip rip routes
Command mode: All except User EXEC
3.0.0.0/8 via 30.1.1.11 metric 4
4.0.0.0/16 via 30.1.1.11 metric 16
10.0.0.0/8 via 30.1.1.2 metric 3
20.0.0.0/8 via 30.1.1.2 metric 2
This table contains all dynamic routes learned through RIP, including the routes that are undergoing
garbage collection with metric = 16. This table does not contain directly connected routes and locally
configured static routes.
Usage
Displays RIP routes.
Command mode: All except User EXEC
Displays RIP interface information.
Command mode: All except User EXEC
Displays RIP user's configuration.
Command mode: All
Information Commands
52