Port Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

Table 96 HTTPS Access Configuration commands
Command
show access

Port configuration

Use the port configuration commands to configure settings for individual switch ports.
NOTE:
Port 18 is reserved for switch management.
The following table describes the Port Configuration commands. The following sections provide more
detailed information and commands.
Table 97 Port Configuration commands
Command
interface port {<port
number>}
dot1p <0-7>
pvid {<1-4095>}
name {<1-64 characters>}
[no] rmon
[no] tagging
[no] tag-pvid
broadcast-threshold
{<0-262143>}
multicast-threshold
{<0-262143>}
Description
Displays the current SSL Web Access configuration.
Command mode: All except User EXEC
Description
Enter Interface Port configuration mode for the selected port.
Command mode: Global configuration
Configures the port's 802.1p priority level.
Command mode: Interface port
Sets the default VLAN number which will be used to forward frames which
are not VLAN tagged. The default number is 1.
VLAN 4095 is reserved for switch management.
NOTE:
Command mode: Interface port
Sets a name for the port (maximum 64 characters). The assigned port name
displays next to the port number on some information and statistics screens.
Command mode: Interface port
Enables or disables Remote Monitoring for the port. RMON must be
enabled for any RMON configurations to function.
Command mode: Interface port
Disables or enables VLAN tagging for this port. It is disabled by default.
Command mode: Interface port
Disables or enables VLAN tag persistence. When disabled, the VLAN tag is
removed from packets whose VLAN tag matches the port PVID. The default
value is enabled.
Command mode: Interface port
Limits the number of broadcast packets per second to the specified value. If
disabled (dis), the port forwards all broadcast packets.
Command mode: Interface port
Limits the number of multicast packets per second to the specified value. If
disabled (dis), the port forwards all multicast packets.
Command mode: Interface port
Configuration Commands
118