Configure Switch Binding; Configure Fabric Parameters Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring the Switch
c. When the warning box displays asking you to confirm the offline state, click
OK.
2. Select Configure > Operating Parameters > Fabric Parameters.
The Configure Fabric Parameters dialog box displays.
Figure 3–3: Configure Fabric Parameters dialog box
NOTE: Ordinarily, you do not need to change values in this dialog box from their defaults.
Change this value if the switch will participate in a multi-switch fabric.
3. Use information described earlier in this section to change settings as required for
parameters in this dialog box.
4. After you change settings, click the Activate button.

Configure Switch Binding

For complete procedures for configuring this optional feature, refer to
on page 6–3.
3–8 edge switch 2/24 product manager user guide
Switch Binding