Configure Port Binding - HP StorageWorks Edge Switch 2/12 Installation Manual

3. For the Operator set of data fields:
4. Click Activate to save the information. The message "Your changes to
5. Choose File > Close to exit the browser
6. Log in using the new user name and password.

Configure Port Binding

Perform this procedure to configure Fibre Channel port binding by WWN:
1. Choose Configure > Security to display the User Rights tab.
2. Click Port Binding to display the Port Binding tab
Edge Switch 2/12 Installation Guide
a. Enter the operator user name (as specified by the network administrator)
in the New User Name field. Use 16 or fewer alphanumeric characters.
b. Enter the operator password (as specified by the network administrator) in
the New Password field. Use 16 or fewer alphanumeric characters.
c. Enter the operator password again in the Confirm New Password field.
the User Rights configuration have been successfully
activated" displays.
Installing and Configuring the Edge Switch 2/12
(Figure 24).
63