HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 102

Configuring the Switch
If LIN Alerts are enabled, you can receive e-mail notification when a LIN occurs.
In order to receive e-mail notification, you must configure and enable this feature
in the HAFM (Maintenance menu) and enable e-mail notification through the
Enable E-Mail Notification option on the Product Manager's Maintenance
menu.
For additional information about LIN alerts, refer to
page 2-38.
• FAN
Click to display a check mark in the check box and enable Fabric Address
Notification for loop devices attached to the port. Right-click in this column to
either clear all FANs for all ports or set all FANs for all ports.
• Type
Select each port's type (G_Port, E_Port, F_Port, Fx_Port, or Gx_Port) in this
column from the drop-down list. Right-click in this column to set all ports to
either, E_Ports, F_Ports, Fx_Ports, G_Ports, or Gx_Ports.
• Port Binding
Click this check box to display a check mark and enable Port binding for the port.
This allows only a specific device to attach to the port. This device is specified by
the WWN or nickname entered into the Bound WWN column. With the check
box cleared, any device can attach to the port even if a WWN or nickname is
specified in the Bound WWN column.
• Bound WWN
Enter a world wide name (WWN) in the proper format (xx.xx.xx.xx.xx.xx.xx.xx)
or a nickname configured through the HAFM application. The device with this
WWN or nickname will have exclusive attachment to the port if Port Binding is
enabled. If a valid WWN or nickname is not entered in this field, but the Port
Binding check box is checked (enabled), then no devices can connect to the port.
If you enter a WWN or nickname in this field and do not place a check in the Port
Binding check box, the WWN or nickname will be stored, and all devices can
connect to the port.
3–10
Link Incident Alerts on
edge switch 2/24 product manager user guide