Enable/Disable And Online State Functions - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Optional Features
3. To prohibit connection to a switch port from a WWN currently in the Membership
List, click the WWN or nickname in the Membership List, then click the Remove
button. The WWN or nickname will move to the Node List panel. WWNs can
only be removed from the fabric if any of the following is true:
• The switch is offline.
• Switch Binding is disabled.
• The switch or device with the WWN is not connected to the switch.
• Switch Binding is not enabled for the same port type as enabled for the
Connection Policy in the Switch Binding State Change dialog box. For example,
a WWN for a switch attached to an E_Port can be removed if the Switch Binding
Connection Policy was enabled to Restrict F_Ports.
• The switch or device with the WWN is connected to a port that is blocked.
• The switch or device with the WWN is not currently connected to the Director
(detached node).
4. WWNs can be added to the Switch Membership List (and thereby allowed
connection) when Switch Binding is either enabled or disabled. To allow
connection to a switch port from a WWN in the Node List panel, select the WWN
or nickname in the Node List panel, click the Add button. The WWN or
nickname will move to the Membership List panel.
5. To add a WWN for a device or switch not currently connected to the Director,
click the Detached Node button. When the Add Detached Node dialog box
appears, enter the appropriate WWN or nickname (if configured through the
HAFM) and click OK. The WWN or nickname appears in the Switch
Membership List.
6. Click Activate to enable the changes and close the dialog box.

Enable/Disable and Online State Functions

In order for Switch Binding to function, specific operating parameters and optional
features must be enabled. Also, there are specific requirements for disabling these
parameters and features when the Director or Edge Switch is offline or online. Be
aware of the following:
• Switch Binding can be enabled or disabled whether the Edge Switch is offline or
online.
• Enabling Enterprise Fabric Mode automatically enables Switch Binding.
6–6 edge switch 2/24 product manager user guide