Using Menu Options; Switch Menu - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

• Preferred Domain ID (configured using the Configure Switch Operating
Parameters dialog box)
• Active Domain ID (actual domain ID assigned to the switch)
• Fibre Channel Address Domain
• CTP State
• Switch Speed (always 2 Gb/sec)
• Switch Binding (enabled if the optional SANtegrity features are installed and
enabled. Otherwise, disabled displays)

Using Menu Options

Right-click on various parts of the Hardware View to display menu options for
displaying status and information and for controlling the switch and various hardware
components.

Switch Menu

Right-click on any area of the switch illustration where a FRU hardware component is
not installed to display the following menu options.
Switch Properties
Click to display the Switch Properties dialog box. This dialog box contains the
switch name, description, location, and contact person configured through the
Configure Identification dialog box. Also included is other product information as
detailed in Displaying Switch Information on page 2-12. You can also display this
dialog box by double-clicking an area on the illustration away from a hardware
component.
Enable Unit Beaconing
Click the check box to toggle unit beaconing on or off. When the check box has a
check mark, unit beaconing is on, and the system error light (ERR) on the switch
blinks to help users locate the unit managed by the Product Manager. The amber
indicator on the Hardware View also blinks when beaconing is enabled. When you
click the check box to remove the check mark, the unit beaconing is disabled.
NOTE: You can only enable beaconing if there are no system errors (the system error light is
off).
edge switch 2/24 product manager user guide
Monitoring and Managing the Switch
2–13