HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 159

Table A–1: StorageWorks Edge Switch 2/24 Product Manager Messages (Continued)
Message
Invalid port number. Valid
ports are (0 - 23).
Invalid port swap.
Invalid response received
from switch.
Invalid serial number for this
feature key.
Invalid UDP port number.
Invalid value for day (1 - 31).
Invalid value for E_D_TOV.
Invalid value for hour (0 -
23).
Invalid value for minute (0 -
59).
Invalid value for month (1 -
12).
Invalid value for R_A_TOV.
Invalid value for second (0 -
59).
edge switch 2/24 product manager user guide
Description
Port number must be within
the range of ports for the
specific switch model. For
this model, the valid port
numbers are 0 - 23.
Port swap selection is not
allowed.
The switch returned an
invalid response.
The serial number and the
feature key did not match.
UDP port number must be
an integer from 1 through
65535.
Value for day must be an
integer from 1 through 31.
Value for E_D_TOV must be
an integer from 2 through
600, measured in tenths of a
second.
Value for hour must be an
integer from 0 through 23.
Value for minute must be an
integer from 0 through 59.
Value for month must be an
integer from 1 through 12.
Value for R_A_TOV must be
an integer from 10 through
1200. Measured in tenths of
a second.
Value for second must be an
integer from 0 through 59.
Product Manager Messages
Action
Enter a port number within
the correct range.
Ensure that each port
selected for swap has not
been previously swapped.
Resend the firmware. If the
condition persists, contact
support personnel.
Ensure that the feature key
being installed is specifically
for this switch serial number.
Enter a port number from 1
through 65535.
Enter a value from 1 through
31.
Enter a value from 2 through
600.
Enter a value from 0 through
23.
Enter a value from 0 through
59.
Enter a value from 1 through
12.
Enter a value from 10 to
1200.
Enter a value from 0 through
59.
A–9