HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 156

Product Manager Messages
Table A–1: StorageWorks Edge Switch 2/24 Product Manager Messages (Continued)
Message
Device applications should
be terminated before
starting diagnostics. Press
NEXT to continue.
[device WWN] cannot be
removed from the Switch
Membership List while
participating in Switch
Binding. The device must be
isolated from the switch, or
Switch Binding deactivated
before it can be removed.
Disabling Insistent Domain
ID will disable Fabric
Binding. Do you want to
continue?
Disabling Switch Binding will
disable Enterprise Fabric
Mode. Do you want to
continue?
Do you want to continue with
IPL?
Duplicate community names
require identical write
authorizations.
A–6
Description
Device application is not
terminated.
User attempted to remove a
device WWN from the
Switch Membership List
(SANtegrity feature) while
Switch Binding is enabled.
Fabric Binding is enabled
through the HAFM and user
attempted to disable
Insistent Domain ID in the
Configure Switch
Parameters dialog box.
User attempting to disable
Switch Binding through the
Switch Binding State
Change dialog box, but
Enterprise Fabric Mode is
enabled
Requesting confirmation to
proceed with an IPL.
Duplicate community names
exist that have conflicting or
different write
authorizations.
edge switch 2/24 product manager user guide
Action
Terminate device application
before running port
diagnostics.
Remove the device from the
switch by blocking the port,
setting the director offline, or
disabling Switch Binding
through the Switch Binding
Change State dialog box
before removing devices
form the Switch Membership
List.
Click Yes if you want to
continue and disable Fabric
Binding.
Disable Enterprise Fabric
Mode using the Enterprise
Fabric Mode dialog box in
the HAFM before disabling
Switch Binding.
Click Yes to confirm the IPL
or Cancel to cancel the
operation.
Verify community names
and whether a community
name is duplicated with
different write
authorizations.