Event Log - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Using Logs
— Fabric: Change was initiated by another switch in the fabric that is not
managed by this HAFM server.
— Web server: Change was made by a user through the Embedded Web Server
interface.
— Fibre Channel Host: Change was made inband by a Fibre Channel host
through the Open Systems Management Server.
— Telnet: Change was made through a telnet connection.
• Identifier - Identifies the user making the change according to the source:
— Maintenance Port: No entry displays.
— HAFM: Includes user@address, where "user" is the Product Manager user
name and "address" is the network address of the workstation (remote user
workstation or HAFM server).
— SNMP: Contains the network address of the SNMP management station.
— Fabric: No entry displays.
— Web Server: The Identifier column contains user@address, where "user" is
the web server user name and "address" is the network address of the web
user.
— Fibre Channel Host: No entry displays.
— Telnet: Change was made through a telnet connection.

Event Log

The Event Log provides a record of significant events that have occurred on the
switch, such as hardware failures, degraded operation, and port problems.
Figure 4–3: Event Log
All detected firmware faults and hardware failures are sent to the HAFM server for
recording in the Event Log. The log provides a maximum of 1000 log entries before it
wraps and overwrites the oldest entries.
4–4 edge switch 2/24 product manager user guide