Port Operational States; Performance View; Port States And Indicators - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Information on the FRU List View for each FRU includes:
• FRU Name: CTP (Control Processor) card and PWR (power-supply module).
Note that the CTP card is an internal component and is not a FRU. If it fails
completely, the entire switch must be replaced.
• Position: Slot position of FRU in the chassis relative to identical FRUs also
installed in the chassis.
• These consist of one CTP card (position 0) and two power supply modules/fan
(positions 0-1):
— PWR - Power supply module/fan
— CTP - Control processor
• Status: Active or failed. Active displays always unless the FRU fails. Failed
displays if the FRU is not functional.
• Part Number: Part number of the FRU.
• Serial Number: Serial number of the FRU.

Port Operational States

Table 2–1 describes the port operational states and the LED and attention indicators
that display in the Hardware View and Port List View.
Table 2–1: Port States and Indicators
Port Indicators
Port State Green/Blue
Beaconing Off or On
Inactive Off
edge switch 2/24 product manager user guide
Alert
Amber Indicator
Blink Yellow
Triangle
Off Yellow
Triangle
Monitoring and Managing the Switch
a
Description
The port is beaconing. The amber
port LED blinks once every two
seconds to enable users to find a
specific port. Enable beaconing
through the port's menu on the
Hardware View, Port List View, or

Performance View.

The switch port is in an inactive
state. Reasons for this state appear
in the Reason field of the Port
Properties dialog box.
Note that if port optics have also
failed, the amber LED will be on.
2–35