HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 158

Product Manager Messages
Table A–1: StorageWorks Edge Switch 2/24 Product Manager Messages (Continued)
Message
Incorrect product type.
Installing this feature key,
while online, will cause an
IPL operation on the switch
and a momentary loss of
LAN connection. This
operation is non-disruptive
to the Fibre Channel traffic.
Do you wish to continue
installing this feature key?
Internal file transfer error
received from switch.
Invalid character in field.
Invalid configuration name.
Invalid feature key.
Invalid firmware file.
Invalid network address.
Invalid port number.
A–8
Description
When configuring a new
product through the New
Product dialog box, an
incorrect product was
selected for the network
address.
If the Edge Switch is online,
installing the new feature
key will cause an internal
program load (IPL). The
LAN connection to the
HAFM server will be lost
momentarily, but Fibre
Channel traffic will not be
affected.
Switch detected an internal
file transfer error.
Invalid character in the input
field.
Attempted to save an
address configuration name
with an invalid name.
The feature key was not
recognized.
Selected file is not a
firmware file.
Network address specified
is not known by the domain
name server.
Port number must be within
the range of ports for the
specific switch model.
edge switch 2/24 product manager user guide
Action
Select the correct product
type for the product with the
network address.
Select Yes to install the
feature key or No to not
install.
Contact support personnel.
Re-enter the field
information.
Use up to 24 alphanumeric
characters, including
spaces, hyphens and
underscores.
Re-enter the feature key
noting the key is
case-sensitive and to
include the dashes.
Select the correct firmware
file.
Check the input address and
specify the correct network
address.
Enter a port number within
the correct range.