HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 153

Table A–1: StorageWorks Edge Switch 2/24 Product Manager Messages (Continued)
Message
Cannot perform this
operation while the switch is
offline.
Cannot retrieve current
SNMP configuration.
Cannot retrieve diagnostics
results.
Cannot retrieve information
for port.
Cannot retrieve port
configuration.
Cannot retrieve port
information.
Cannot retrieve port
statistics.
Cannot retrieve switch date
and time.
Cannot retrieve switch state.
Cannot run diagnostics on a
port that is failed.
Cannot run diagnostics on
an active E-port.
edge switch 2/24 product manager user guide
Description
This operation cannot take
place while the switch is
offline.
The current SNMP
configuration cannot be
retrieved. The link is down or
busy.
Diagnostics results cannot
be retrieved. The link is
down or busy.
Information for the port
cannot be retrieved. The link
is down or busy.
Port configuration cannot be
retrieved. The link is down or
busy.
Port information cannot be
retrieved. The link is down or
busy.
Port statistics cannot be
retrieved. The link is down or
busy.
Switch date and time cannot
be retrieved. The link is
down or busy.
Switch state cannot be
retrieved. The link is down or
busy.
Port diagnostics cannot be
performed on a port that has
failed.
Port diagnostics cannot be
performed on an active
E-port.
Product Manager Messages
Action
Configure the switch offline
through the Set Online State
dialog box then retry the
operation.
Retry the operation later. If
the condition persists,
contact support personnel.
Retry the operation later. If
the condition persists,
contact support personnel.
Retry the operation later. If
the condition persists,
contact support personnel.
Retry the operation later. If
the condition persists,
contact support personnel.
Retry the operation later. If
the condition persists,
contact support personnel.
Retry the operation later. If
the condition persists,
contact support personnel.
Retry the operation later. If
the condition persists,
contact support personnel.
Retry the operation later. If
the condition persists,
contact support personnel.
Run diagnostics only on an
operational port.
Run diagnostics on an
E-port only when it is not
active.
A–3