Editing The Switch Membership List - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

3. Click one of the Connection Policy radio buttons.
• Restrict E_Ports. Select if you want to restrict connections from specific
switches to Director E_Ports. Switch WWNs can be added to the Switch
Membership List to allow connection and removed from the Membership List to
prohibit connection. Devices are allowed to connect to any F_Port.
• Restrict F_Ports. Select if you want to restrict connections from specific devices
to Director F_Ports. Device WWNs can be added to the Switch Membership List
to allow connection and removed from the Membership List to prohibit
connection. Switches are allowed to connect to any E_Port.
• Restrict All. Select if you want to restrict connections from specific devices to
Director F_Ports and Edge Switches to Edge Switch E_Ports. Device and switch
WWNs can be added to the Switch Membership List to allow connection and
removed from the Membership List to prohibit connection.
4. Click Activate to enable the changes and close the dialog box.
5. Edit the Switch Membership List through the Switch Binding Membership List
dialog box to add or remove switches and devices that are allowed to connect with
the switch. Refer to following section for procedures.

Editing the Switch Membership List

1. Select the Edit Membership List option from the Configure menu's Switch
Binding submenu in the Product Manager. The Switch Binding Membership
List dialog box displays. The WWNs of devices and/or switches that can currently
connect to switch ports are listed in the Switch Membership List panel.
NOTE: Refer to
Switch Membership List is populated with WWNs according to options set in the Switch Binding
State Change dialog box.
2. If nicknames are configured for WWNs through the HAFM and you want these to
display instead of WWNs in this dialog box, click the Display Options button at
the bottom of the dialog box. When the Display Options dialog box displays,
click Nickname, then OK.
edge switch 2/24 product manager user guide
Configuring Switch Binding - Overview on page 6–3
Optional Features
for information on how the
6–5