HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 164

Product Manager Messages
Table A–1: StorageWorks Edge Switch 2/24 Product Manager Messages (Continued)
Message
The firmware version
already exists.
The HAFM server is busy
processing a request from
another Product Manager
The link to the switch is not
available.
The maximum number of
address configurations has
been reached.
The optical transceiver is not
installed.
The switch did not accept
the request.
The switch did not respond
in the time allowed.
The switch is busy saving
maintenance information.
The switch must be offline to
configure.
This feature has not been
installed. Please contact
your sales representative.
A–14
Description
Firmware version already
exists in the database.
The HAFM server could not
process the current request
because it is busy handling
a request from another
Product Manager.
The link from the HAFM
server to the switch is not
available.
The maximum number of
saved address
configurations has been
reached.
No information available for
a port that is not installed.
The switch did not handle
the action.
A time out was reached
waiting for the switch to
respond to the action.
switch is busy with a
maintenance operation.
A configuration changed
was attempted for a
configuration requiring
offline changes.
Indicator that the feature has
not been installed on this
switch.
edge switch 2/24 product manager user guide
Action
N/A. An informational
message.
Retry the operation later. If
the condition persists,
contact support personnel.
Check Ethernet connection.
Delete configurations no
longer needed to allow new
configuration to be saved.
Ensure the optical
transceiver is installed and
fully seated.
Try action again. If problem
persists, contact your
support representative.
Try action again.
Retry the operation later. If
the condition persists,
contact support personnel.
Take the appropriate actions
to set the switch offline
before attempting the
configuration change.
Contact your sales
representative to obtain the
desired feature.