Configure The Switch For Web-Based Authentication - HP ProCurve 6200yl Series Access Security Manual

Web and MAC Authentication
Configuring Web Authentication on the Switch
4-18

Configure the Switch for Web-Based Authentication

Command
Configuration Level
aaa port-access web-based dhcp-addr
aaa port-access web-based dhcp-lease
[no] aaa port-access web-based [e] < port-list >
[auth-vid]
[client-limit]
[client-moves]
[logoff-period]
[max-requests]
[max-retries]
[quiet-period]
[reauth-period]
[reauthenticate]
[redirect-url
[server-timeout]
[ssl-login]
[unauth-vid]
Syntax: aaa port-access web-based dhcp-addr <ip-address/mask>
Specifies the base address/mask for the temporary IP
pool used by DHCP. The base address can be any valid
ip address (not a multicast address). Valid mask range
value is <255.255.240.0 - 255.255.255.0>.
(Default: 192.168.0.0/255.255.255.0)
Syntax: aaa port-access web-based dhcp-lease <5 - 25>
Specifies the lease length, in seconds, of the temporary
IP address issued for Web Auth login purposes.
(Default: 10 seconds)
Page
4-18
4-18
4-19
4-19
4-19
4-19
4-20
4-20
4-20
4-20
4-20
4-20
4-21
4-21
4-21
4-22