Configure Date And Time Manually; Set Online State Dialog Box (Offline) - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

2. Perform one of the following steps:
— To immediately synchronize the switch date and time with the HAFM server,
be sure the Periodic Date/Time Synchronization option is enabled and then
click Sync Now.
NOTE: If you enable the Periodic Date/Time Synchronization feature and click Activate, the
time will synchronize at the next update period.
— To set the switch with a specific date and time, make sure that the Periodic
Date/Time Synchronization field is not selected. Refer to
the date and time and then click Activate.
Figure 2–6: Configure date and time manually
NOTE: Use the range of 0 to 23 for hours. Use the range of 0 to 59 for minutes and seconds.
Set Switch Online State
Click to display the Set Online State dialog box. The dialog box displays the current
state (offline or online) and provides a button for changing the state.
CAUTION: Before setting the switch offline, warn administrators and users currently
operating attached devices that the switch is going offline and that there will be a
disruption of port operation. Also, request that the devices affected by an interruption
of data flow be set offline.
1. Click the Set Offline or Set Online button to toggle between the states.
Figure 2–7: Set Online State dialog box (Offline)
edge switch 2/24 product manager user guide
Monitoring and Managing the Switch
Figure 2–6. Enter
2–15