Snmp Agent - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Switch Binding
This submenu provides two options if the SANtegrity feature is installed through
the Configure Feature Key dialog box: Change State and Edit Membership
List. Selecting Change State displays the Switch Binding State Change dialog
box where you can activate Switch Binding according to a specific connection
policy (Restrict E_Ports, Restrict F_Ports, or All Ports). Edit Membership List
allows you to create a list of switches and devices that you want to allow
exclusively to attach to switch ports. For details, refer to
Binding on page
Ports
Select this option to display the Configure Ports dialog box. For each port you
can provide a name, block or unblock operation, configure extended distance
buffering for 10 to 100km, enable LIN alerts for each port, enable Fabric Address
Notification (FAN), define a type (G, F, E, Gx, and Fx), and enable port binding.
NOTE: Ports are automatically configured as Gx_Ports if no device is connected, F_Ports if a
device is connected, E_Ports if a switch is connected and FL_Port if connected to a loop device.

SNMP Agent

Select this option to display the Configure SNMP dialog box. Use this dialog box
to configure network addresses and community names for up to six SNMP trap
recipients. Also authorize write permissions to enable SNMP management
stations to modify writable MIB variables. In addition, you can enable
authorization traps to be sent to management stations when unauthorized stations
request access to switch SNMP data.
Features
Displays the Configure Feature Key dialog box. Use this dialog box to enter a
feature key to enable optional features that you have purchased for the switch.
Date and Time
Select this option to display the Configure Date and Time dialog box. Use this
option to set the current date and time in the switch. When the Periodic
Date/Time Synchronization check box is checked, the Date and Time fields are
greyed out (disabled), and the HAFM server date and time periodically
synchronizes the switch date and time. If the Periodic Date/Time
Synchronization check box is not checked, you can set the date and time in the
dialog box fields manually.
edge switch 2/24 product manager user guide
3-8.
Product Manager Overview
Configure Switch
1–17