HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 38

Product Manager Overview
This back up is primarily for single-CTP systems, where a back up is needed to
restore the configuration data to a replacement CTP card. You cannot modify the
location or the file name of the saved configuration.
For additional information on using this option, refer to
Configuration Data on page
NOTE: You can only restore the configuration to a switch with the same IP address.
Reset Configuration
Select this option to reset all switch configuration data back to the factory
defaults. A confirmation dialog box displays with a warning upon selecting the
option. For additional information on using this option, refer to
Configuration on page
WARNING: This operation resets all configuration including any optional
features that have been installed. You will need to re-enter your feature key to
enable all optional features after resetting the configuration.
Help Menu
Click on the Help menu on the menu bar to display the following options.
Contents
Select this option to display the Help window. The Help window contains
Contents, Index, and Glossary buttons and hypertext- linked items to help you
quickly navigate through information. Use the forward (>) and back (<) buttons to
scroll forward and backward through the displayed help frames. Exit the help
feature at any time by clicking the Close selection at the top of the Help window.
About
Select this option to display the version number for the Product Manager and
copyright information.View Tabs
Click one of the view tabs across the top of the Product Manager window to display
the following views in the View panel.
• Hardware
• Port List
• Node List
1–22
3-29.
5-7.
edge switch 2/24 product manager user guide
Backing Up and Restoring
Reset