9. Troubleshooting
8.
Reinstall the cartridge, pushing it into the unit until it clicks.
9.
Return the staple unit to its original position.
10.
Close the finisher's front cover.
9
• Warped paper may cause repeated staple jams. In this case, load the paper upside down.
• When removing jammed staples, staples might not be ejected the first few times you try to use the
stapler.
Finisher SR4000
The following procedure explains how to remove jammed staples from the Finisher SR4000.
1.
Open the finisher's front cover.
2.
Pull out the staple unit. Pull out the cartridge gently.
118
AST123S
AST060S