Ricoh 9100DN - Aficio SP B/W Laser Printer Hardware Manual page 102

9. Troubleshooting
• Prepare a new toner bottle.
• You can print until [Add Toner] appears.
Menu Protected Cannot change
The operation panel has been digitally locked, and settings cannot be changed.
• This alert message is displayed for 2 seconds before returning to the previous panel display screen.
No Files exist
There are no files available for Sample Print or Locked Print.
• Check the error list to identify the files unavailable for printing.
Open Front Cover Reset B2 Lever
B2 lever is not set correctly
• Open the front cover, then reset the B2 lever correctly.
P=XX I=XXXXXXXX Power Off On/Call Service if error reoccurs
Controller error. The SC number indicates the problem.
• Turn the power switch to Stand by, and then to On. If the message appears again, call your sales /
service representative. Report the error code that appears.
RC Gate connection error
The printer cannot communicate with Remote Communication Gate.
• Call your sales / service representative.
Remove Misfeed A,U: Internal
9
Paper is jammed in the specified input paper tray or LCT.
• Open the front or LCT cover, and then remove jammed paper.
• See p.127 "Remove Misfeed A, U: Internal".
Remove Misfeed B-F: Internal
Paper is jammed in the internal paper feed path.
• Open the front cover and remove jammed paper.
• See p.130 "Remove Misfeed B-F: Internal".
Remove Misfeed Q: Interposer
Paper is jammed in the Interposer.
• Remove paper from the Interposer, and then reload paper.
• See p.135 "Remove Misfeed Q: Interposer".
Remove Misfeed R: Finisher
100