6. Paper and Other Media
• The setting made here is valid until the next setting is made. After printing on thick paper, reset it to
the original setting for the next user.
• For printer driver settings, see the printer driver Help.
Loading Paper into Tray 2 and 3
The following explains the procedure for loading paper into Tray 2 and 3.
• Various sizes of paper can be loaded in Tray 2 and 3 by adjusting the positions of side fence and
end fence.
• Check the paper edges are aligned at the right side.
• Do not stack paper over the limit mark.
1.
Carefully pull out the paper tray until it stops.
6
2.
Square the paper, and then place it print side down.
3.
Carefully push the paper tray fully in.
• The tray can hold up to 550 sheets.
66
ANS054S
ANS055S