4. Configuration
The menu appears on the display.
2.
Press the [ ] or [ ] key to select [Host Interface], and then press the [
4
3.
Press the [ ] or [ ] key to select [Network Setup], and then press the [
4.
Press the [ ] or [ ] key to select [IPv4 Settings], and then press the [
5.
Press the [ ] or [ ] key to select [DHCP], and then press the [
6.
Press the [ ] or [ ] key to select [On] or [Off], and then press the [
The address will be detected by the printer.
The default setting is [On].
7.
Press the [Menu] key to return to the initial screen.
8.
Print a configuration page to confirm the settings made.
42
AST008S
Enter] key.
Enter] key.
Enter] key.
Enter] key.
Enter] key.