Ieee 802.11B (Wireless Lan) Configuration - Ricoh 9100DN - Aficio SP B/W Laser Printer Hardware Manual

IEEE 802.11b (Wireless LAN) Configuration

Configure the printer to use IEEE 802.11b (Wireless LAN). The following table shows the control panel
settings and their default values. These items appear in the [Host Interface] menu.
Setting Name
Comm.Mode
Channel
Trans. Speed
SSID
Security Method
• For using the IEEE 802.11b interface unit, installing the optional SDRAM module is required. If the
optional SDRAM module is not installed, the printer does not detect the unit, and also it does not
function because of memory shortage.
• To use IEEE 802.11b (Wireless LAN), set as the followings using the control panel: press the [Menu]
key, and then select [Host Interface], [Network Setup], [LAN Type], and then [IEEE 802.11b]. Also,
set the IP address, subnet mask, gateway address, DHCP, Frame Type (NW), and active protocol.
• The 802.11b interface unit cannot be used simultaneously with a standard ethernet interface.
1. Press the [Menu] key.
The menu appears on the display.
IEEE 802.11b (Wireless LAN) Configuration
802.11 Ad hoc
Metric version: (1-13) 13
Inch version: (1-11) 11
Auto
blank
None
AST008S
Default Value
4
47