Adding Staples; Finisher Sr841 - Ricoh 9100DN - Aficio SP B/W Laser Printer Hardware Manual

Adding Staples

• Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple
unit. You can trap your fingers if you do not.
When "Add staples" appears on the panel display, the staples are almost empty. Follow these steps to
replace the staple refill with a new one.
• Stapling failures or jams may occur if you use a staple cartridge other than that recommended.

Finisher SR841

The following procedure explains how to add staples to the Finisher SR841.
1. Open the finisher's front cover.
2. Pull the lever R7 to slide out the unit, and then pull the lever R8 to slide out the staple unit.
3. Pull the cartridge gently out of the staple unit.
AST114S
AST115S
Adding Staples
7
81