Setting Up; Where To Put The Printer; Space Required For Installation - Ricoh 9100DN - Aficio SP B/W Laser Printer Hardware Manual

2. Setting Up

Where to Put the Printer

• Confirm the wall outlet is near the machine and freely accessible, so that in the event of emergency,
it can be unplugged easily.
• Only connect the machine to the power source described in the manual.
• Avoid multi-wiring.
• Do not damage, break or make any modifications to the power cord. Do not place heavy objects on
it, pull it hard or bend it more than necessary. These actions could cause an electric shock or fire.
• Enclosed set of power cord is only for the use with this product and should not be used with any other
electronic equipment or appliances. Do not use any other power cord with this product. They could
cause electric shock or fire.
• Do not handle the plug with wet hands. Doing so might cause an electrical shock.
• Keep the machine in an area that is within optimum environmental conditions. Operating the machine
in an environment that is outside the recommended ranges of humidity and temperature can cause
an electrical fire hazard. Keep the area around the socket free of dust. Accumulated dust can become
an electrical fire hazard.
• Place the machine on a strong and level surface. Otherwise, it might fall and injure someone.
• If you use the machine in a confined space, ensure there is continuous air circulation.

Space Required for Installation

• Ensure there is adequate space around the printer. This space is necessary to operate the printer. The
recommended (or minimum) space requirements are as follows:
AST100S
2
19