Loading Paper Into The A3 / 11" × 17" Tray Unit - Ricoh 9100DN - Aficio SP B/W Laser Printer Hardware Manual

6. Paper and Other Media
6. Press the [ ] or [ ] key to display [Paper Input], and then press the [
7. Press the [ ] or [ ] key to display [Tray 2] or [Tray 3], and then press the [
8. Press the [ ] or [ ] key to display [Tab Stock] using [ ] or [ ], and then press the [
key.
9. Press the [Online] key.
The initial screen appears.
• Check the position of the index tab to avoid cropping the image.
6
• Set the tab stock with the side to be printed facing down.
Loading Paper into the A3 / 11" × 17" Tray Unit
The following procedure explains how to load paper into the A3 / 11" × 17" tray unit. To use the A3 /
11" × 17" tray unit, you must replace Tray 1.
• Make sure that the paper stack is flush to the right side fence.
• Do not stack paper over the limit mark.
1. Carefully pull out the paper tray until it stops.
2. Place the paper in the tray along the edge on the left.
72
ANQ008S
Enter] key.
Enter] key.
Enter]