Configuration; Ethernet Configuration - Ricoh 9100DN - Aficio SP B/W Laser Printer Hardware Manual

4. Configuration

Ethernet Configuration

Make the following network settings according to the network interface you are using. You can use Smart-
DeviceMonitor for Admin or a Web browser to make IP address-related settings in a TCP/IP-capable
environment.
The following table shows the control panel settings and their default values. These items appear in the
[Host Interface] menu.
Setting Name
IPv4 Settings
IPv6 Settings
Frame Type (NW)
Active Protocol
Ethernet Speed
LAN Type
• Configure the printer for the network using the control panel.
• If DHCP is in use, the IP address, subnet mask, and gateway address are all set automatically.
• Make this setting only when it is necessary. See Software Guide.
1. Press the [Menu] key.
Value
• DHCP: On
• IPv4 Address: 011.022.033.044
• Subnet Mask: 000.000.000.000
• Gateway Address: 000.000.000.000
Stateless sett.: Active
Auto Select
• IPv4: Active
• IPv6: Not Active
• NetWare: Active
• SMB: Active
• AppleTalk: Active
Auto Select
Ethernet
4
39