Figure 23. Attaching A Hard Disk Drive To A Carrier - Intel TIGI2U - Carrier Grade Server User Manual

Platform Installations and Upgrades
7. Align the holes in the drive to the holes in the drive carrier and attach it to the carrier
using four screws that meet the drive vendor's recommendation (see letter "B").
8. With the black lever in the fully open position, slide the drive assembly into the chassis.
Insert the primary drive in the right bay (see letter "A"). The green latch at the front of
the drive carrier must be to the right. Do not push on the black drive carrier lever until
the lever begins to close by itself.
9. When the black drive carrier lever begins to close by itself, push on it to lock the drive
assembly into place (see letter "B").
®
Intel Carrier Grade Server TIGI2U User Guide

Figure 23. Attaching a Hard Disk Drive to a Carrier

47