Platform Installations and Upgrades
Installing the Power Interface Board
1. Press down on the power interface retention lever (see letter "A") and lower the
replacement power interface board into place (see letter "B").
2.
Make sure that the power interface board is placed over the placement pegs and
gently push down (see letter "C").
3. Connect all power cables.
4. Install the power supply. For instructions, see
5. Install the peripheral bay drive. For instructions, see
ROM Drive."
6. Install the processor air duct. For instructions, see
7. Install the PCI riser assembly. For instructions, see
8. Install the chassis cover. For instructions, see
Replacing the Serial/Alarms Cable
®
The Intel
Carrier Grade Server TIGI2U includes a serial/alarms cable. To replace the
serial/alarms cable, use the following instructions.
70
Figure 48. Installing the Power Interface Board
"Installing the Power Supply."
"Installing the CD-ROM / DVD-
"Installing the Processor Air Duct."
"Installing a PCI Add-in Card."
"Installing the Chassis Cover."
®
Intel
Carrier Grade Server TIGI2U User Guide