Removing The Serial/Alarms Cable; Figure 49. Removing The Serial/Alarms Cable Threaded Standoffs; Figure 50. Removing The Serial/Alarms Connector From The Chassis - Intel TIGI2U - Carrier Grade Server User Manual

Platform Installations and Upgrades

Removing the Serial/Alarms Cable

1. Power down the server system and unplug all peripheral devices and the AC power
cable or the DC mains.
2. Remove the chassis cover. For instructions, see
3. Remove the threaded standoffs as shown in Figure 49.

Figure 49. Removing the Serial/Alarms Cable Threaded Standoffs

4. Remove the serial/alarms connector from the chassis.

Figure 50. Removing the Serial/Alarms Connector from the Chassis

®
Intel Carrier Grade Server TIGI2U User Guide
"Removing the Chassis Cover."
71