Platform Installations and Upgrades
Removing the Power Interface Board
1. Power down the server system and unplug all peripheral devices and the AC power
cable or the DC mains.
2. Remove the chassis cover. For instructions, see
3. Remove the PCI riser assembly. For instructions, see
steps 3 – 4.
4. Remove the processor air duct. For instructions, see
Duct."
5. Remove the peripheral bay drive. For instructions, see
DVD-ROM Drive."
6. Remove the power supply. For instructions, see
7. Disconnect all power cables from the power interface board.
8. Press down on the power interface retention lever (see letter "A") and pull up to
release the power interface board from the placement pegs (see letter "B").
9. Lift the power interface board from the chassis (see letter "C").
®
Intel
Carrier Grade Server TIGI2U User Guide
Figure 47. Removing the Power Interface Board
"Removing the Chassis Cover."
"Removing a PCI Add-in Card."
"Removing the Processor Air
"Removing the CD-ROM /
"Removing the Power Supply."
69