Replacing The Power Interface Board; Figure 46. Installing The Full Height Pci Riser Board - Intel TIGI2U - Carrier Grade Server User Manual

Platform Installations and Upgrades
11. Install the PCI card(s). For instructions, see
12. Install the chassis cover. For instructions, see

Replacing the Power Interface Board

The power interface board routes power from the power supply to the rest of the server
system. To replace the power interface board, the PCI riser assembly and the power
supply must be removed. Use the following instructions to replace the power interface
board.
CAUTION
Before replacing any of the server boards, you must first take the
server out of service, turn off all peripheral devices connected to the
system, turn off the system by pressing the power button, and unplug
the AC power cord from the system or wall outlet or disconnect the
DC mains.
68

Figure 46. Installing the Full Height PCI Riser Board

"Installing a PCI Add-in Card."
"Installing the Chassis Cover."
®
Intel Carrier Grade Server TIGI2U User Guide