Removing The Four-Fan Assembly; Figure 36. Removing The Four-Fan Assembly - Intel TIGI2U - Carrier Grade Server User Manual

Platform Installations and Upgrades

Removing the Four-Fan Assembly

1. Power down the server system and unplug all peripheral devices and the AC power
cable or the DC mains.
2. Remove the chassis cover. For instructions, see
3. Remove the processor air duct. For instructions, see
Duct."
4. Disconnect the fan connectors from the front panel I/O board (see letter "A" in Figure
36).
5. Remove the captive screw that attaches the four-fan assembly to the chassis (see
letter "B" in Figure 36).
6. Lift the fan module and remove it from the chassis (see letter "C" in Figure 36).
58

Figure 36. Removing the Four-Fan Assembly

"Removing the Chassis Cover."
"Removing the Processor Air
®
Intel Carrier Grade Server TIGI2U User Guide