Removing A Pci Add-In Card; Figure 29. Installing Full Length Pci Card Into Riser - Intel TIGI2U - Carrier Grade Server User Manual

Platform Installations and Upgrades
6. Insert the PCI riser assembly into the chassis.
7. Install the chassis cover. For instructions, see

Removing a PCI Add-in Card

1. Power down the server system and unplug all peripheral devices and the AC power
cable or the DC mains.
2. Remove the chassis cover. For instructions, see
3. Disengage the power connector from the PCI riser card assembly.
4. Lift blue tabs and pull up on the riser to remove the PCI riser card assembly from the
chassis (see Figure 27).
5. Place riser assembly as shown.
• To remove a low-profile PCI card (see Figure 30): Unlock the tool-less retention
bar as shown (see letter "A") and pull the PCI card from the riser card slot (see
letter "B").
• To remove a full-height PCI card (see Figure 31): Unlock the retention bar as
shown (see letter "A"). Unscrew the PCI card bracket (see letter "B") and pull
the PCI card from the riser card slot (see letter "C").
®
Intel Carrier Grade Server TIGI2U User Guide

Figure 29. Installing Full Length PCI Card into Riser

"Installing the Chassis Cover."
"Removing the Chassis Cover."
53