Wireless Security - TP-Link TL-WA7510N User Manual

TL-WA7510N

5.7.2 Wireless Security

Choose menu "Wireless > Wireless Security", and then you can configure the security settings
of your wireless network.
There are three wireless security modes supported by the Device: WEP (Wired Equivalent
Privacy), WPA/WPA2
WPA-PSK/WPA2-PSK (Pre-Shared Key).
Note:
Only in Standard AP mode, the current operation mode is shown at the top. Besides, if Multi-SSID,
a sub mode of Standard AP, is selected, you can choose one of the 4 SSIDs from the pull-down
list.
You can select one of the following security options:
Disable Security - The wireless security function can be enabled or disabled. If disabled, the
wireless stations will be able to connect the AP without encryption. It is recommended
strongly that you choose one of following options to enable security.
5GHz 150Mbps Outdoor Wireless Access Point User Guide
(Wi-Fi Protected
Figure 5-30 Wireless Security
103
Access/ Wi-Fi Protected Access 2), and