Wireless Security - TP-Link TL-WR743ND User Manual

Auth Type - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). It
indicates the authorization type of the Root AP.
Password - If the AP your Router is going to connect needs password, you need to fill the
password in this blank.
Be sure to click the Save button to save your settings on this page.
Note:
1. The operating distance or range of your wireless connection varies significantly based on the
physical placement of the Router. For best results, place your Router.
Near the center of the area in which your wireless stations will operate.
In an elevated location such as a high shelf.
Away from the potential sources of interference, such as PCs, microwaves, and cordless
phones.
With the Antenna in the upright position.
Away from large metal surfaces.
2. Failure to follow these guidelines can result in significant performance degradation or inability
to wirelessly connect to the Router.

4.7.2 Wireless Security

Choose menu "Wireless → Wireless Security", and then you can configure the security
settings of your wireless network.
There are five wireless security modes supported by the Router: WEP (Wired Equivalent Privacy),
WPA-Enterprise (Wi-Fi Protected Access), WPA2-Enterprise (Wi-Fi Protected Access 2),
WPA-Personal (Pre-Shared Key) and WPA2-Personal (Pre-Shared Key).
TL-WR743ND 150Mbps Wireless AP/Client Router
- 58 -