TP-Link TL-WA7510N User Manual page 55

TL-WA7510N
Disable Security - Check this box radio button to disable wireless security. If disabled, the
wireless stations will be able to connect this device without encryption. It is strongly
recommended that you choose one of the security types to enable security.
WPA/WPA2 - Select WPA/WPA2 based on Radius Server.
Version - You can select one of following versions.
Automatic - Select WPA or WPA2 automatically based on the wireless station's capability
and request.
WPA - Wi-Fi Protected Access.
WPA2 - WPA version 2.
Encryption - You can select Automatic, TKIP or AES.
Radius Server IP - Enter the IP address of the Radius Server.
Radius Port - Enter the port used by radius service.
Radius Password - Enter the password for the Radius Server.
Group Key Update Period - Specify the group key update interval in seconds. The value can
be either 0 or at least 30. Enter 0 to disable the update.
Note:
This security option will become unavailable, if the Enable VLAN box in Figure 3-13 is checked.
WPA-PSK/ WPA2-PSK - Select WPA based on pre-shared key.
Version - You can select one of following versions.
Automatic - Select WPA-PSK or WPA2-PSK automatically based on the wireless station's
capability and request.
WPA-PSK - Pre-shared key of WPA.
WPA2-PSK - Pre-shared key of WPA2.
Encryption - When you select WPA-PSK or WPA2-PSK for Authentication Type, you can
select Automatic, TKIP or AES as Encryption.
PSK Passphrase - Enter a passphrase here.
Group Key Update Period - Specify the group key update interval in seconds. The value can
be either 0 or at least 30. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.
Note:
You will be reminded to reboot the device after clicking the Save button.
5GHz 150Mbps Outdoor Wireless Access Point User Guide
47