Table of Contents
Advertisement
TL-WA7510N
To filter wireless users by MAC Address, click Enable. The default setting is Disable.
MAC Address - The wireless station's MAC address that you want to filter.
Description - A simple description of the wireless station.
Status - The status of this entry, either Enabled or Disabled.
To Add a Wireless MAC Address filtering entry, click the Add New... button. The "Add or
Modify Wireless MAC Address Filtering entry" page will appear, shown in Figure 5-32:
Figure 5-32 Add or Modify Wireless MAC Address Filtering entry
To add or modify a MAC Address Filtering entry, follow these instructions:
1.
Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address
is
XX-XX-XX-XX-XX-XX(X
00-0A-EB-B0-00-0B.
2.
Give a simple description for the wireless station in the Description field. For example:
Wireless station A.
5GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 5-31 Wireless MAC Filtering
is
any
106
hexadecimal
digit).
For
example:
Hide quick links:
Advertisement
Table of Contents
