TP-Link TL-WA7510N User Manual page 58

TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
4) Repeater
Figure 4-20 Wireless Security – Repeater
Operation Mode - Shows the current operation mode.
Disable Security - Check this box radio button to disable wireless security. If disabled, the
wireless stations will be able to connect this device without encryption. It is strongly
recommended that you choose one of the security types to enable security.
WEP - Select 802.11 WEP security.
Type - You can select one of following types.
Automatic - Select Shared Key or Open System authentication type automatically based on
the wireless station's capability and request.
Shared Key - Select 802.11 Shared Key authentication type.
Open System - Select 802.11 Open System authentication.
WEP Key Format - You can select ASCII or Hexadecimal format. ASCII format stands for
any combination of keyboard characters in the specified length. Hexadecimal format stands
for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length.
WEP Key - Select which of the four keys will be used and enter the matching WEP key
information for your network in the selected key radio button. These values must be identical
on all wireless stations in your network.
Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for encryption.
"Disabled" means this WEP key entry is invalid.
50