Quick Setup; Qss - TP-Link TL-WA7510N User Manual

TL-WA7510N

5.3 Quick Setup

Please refer to Section 3.2 Quick Setup – 3.2.2 AP Router Mode
3.2.3 AP Client Router Mode

5.4 QSS

This section will guide you to add a new wireless device to an existing network quickly by QSS
(Quick Secure Setup) function.
Select menu QSS, then you will see the next screen (shown in Figure 5-5 ).
QSS Status - Enable or disable the QSS function here.
Current PIN - The current value of the Device's PIN displayed here. The default PIN of the
Device can be found in the label or User Guide.
Restore PIN - Restore the PIN of the Device to its default.
Gen New PIN - Click this button, and then you can get a new random value for the Device's
PIN. You can ensure the network security by generating a new PIN.
Add A New Device - You can add the new device to the existing network manually by clicking
Add Device button.
Note:
The QSS function cannot be configured if the Wireless Function of the Device is disabled. Please
make sure the Wireless Function is enabled before configuring the QSS.
To add a new device:
1. If the new device supports Wi-Fi Protected Setup and is equipped with a configuration button,
you can add it to the network by pressing the configuration button on the device.
2. If the new device supports Wi-Fi Protected Setup and the connection way using PIN, you can
add it to the network by entering the Device's PIN.
5GHz 150Mbps Outdoor Wireless Access Point User Guide
for more details.
Figure 5-5 QSS
79
or Section 3.2 Quick Setup –