Table of Contents
Advertisement
TL-WA7510N
Chapter 3 Quick Installation Guide
3.1
Configuring the PC
This chapter will guide you to configure your PC to communicate with the AP. The wireless
adapter-equipped computers in your network must be in the same IP Address range without
overlapping with each other. Manually configure the IP address as 192.168.1.* (* is any number
within 1 to 253), and the Subnet mask as 255.255.255.0 for your PC following the instructions
below.
Connect the local PCs to the LAN ports on the AP and configure the IP address manually for your
PCs.
1.
Click Start (in the lower left corner of the screen), right-click My Network Connections and
choose Properties.
2.
On the My Network Connections window shown as Figure 3-2 below, right-click LAN (Local
Area Connection) and choose Properties.
5GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 3-1
11
Hide quick links:
Advertisement
Table of Contents
